MB90F474LPFV datasheet(13/118 Pages) FUJITSU

13 / 118 page

MB90470 Series

(Continued)

LQFP : FPT-100P-M05 package

QFP : FPT-100P-M06 package

Notes :

• For use as a 3.3 V single supply device, apply the same voltage to the VCC3 and VCC5 power supply pins.

• For use with a dual power supply, apply the respective voltages to the VCC3 and VCC5 power supply pins.

• In use with a dual power supply, a total of 32 pins (P20/A16 to P27/A23/PPG3, P30/A00/AIN0 to P37/

A07/PWC1, P40/A08/SIN2 to P47/A15/OUT5 and P70/SIN0 to P77/SDA) can be used in a 5 V interface.

Note that all other pins must be used in 3 V interface.

• In use with a dual power supply, it is not possible to turn on only the 5 V or the 3 V power supply

independently. Always turn on both power supplies simultaneously. (It is recommended that the 3 V power

to the MB90470 series be turned on first.)

Pin no.

Pin name

Circuit

type

Description

LQFP

QFP

P97

(CMOS/H)

General purpose input/output port.

IN1

Functions as input capture ch 1 trigger input.

64 to 67 66 to 69

PA0 to PA3

(CMOS)

General purpose input/output ports.

OUT0 to OUT3

Output compare event output pins.

AVCC



A/D converter power supply pin.

AVRH



A/D converter external reference power pin.

AVSS



A/D converter power supply pin.

47 to 49 49 to 51

MD0 to MD2

(CMOS/H)

Input pins for specifying operating mode.

VCC3



3.3 V

± 0.3 V power supply pin (VCC3) .

VCC5



3.3 V

± 0.3 V/5.0 V ± 0.5 V dual power supply pin (VCC5) .

VSS



Power supply input pins (GND) .

MB90F474LPFV Datasheet(PDF) 13 Page - fujitsu semiconductor

MB90F474LPFV Datasheet(HTML) 13 Page - fujitsu semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL