PIC16F87X datasheet(20/218 Pages) MICROCHIP

20 / 218 page

PIC16F87X

DS30292D-page 20

 1998-2013 Microchip Technology Inc.

2.2.2.3

INTCON Register

The INTCON Register is a readable and writable regis-

ter, which contains various enable and flag bits for the

TMR0 register overflow, RB Port change and External

RB0/INT pin interrupts.

INTCON REGISTER (ADDRESS 0Bh, 8Bh, 10Bh, 18Bh)

Note:

Interrupt flag bits are set when an interrupt

condition occurs, regardless of the state of

its corresponding enable bit or the global

enable bit, GIE (INTCON<7>). User soft-

ware should ensure the appropriate inter-

rupt flag bits are clear prior to enabling an

interrupt.

R/W-0

R/W-x

GIE

PEIE

T0IE

INTE

RBIE

T0IF

INTF

RBIF

bit 7

bit 0

bit 7

GIE: Global Interrupt Enable bit

= Enables all unmasked interrupts

= Disables all interrupts

bit 6

PEIE: Peripheral Interrupt Enable bit

= Enables all unmasked peripheral interrupts

= Disables all peripheral interrupts

bit 5

T0IE: TMR0 Overflow Interrupt Enable bit

= Enables the TMR0 interrupt

= Disables the TMR0 interrupt

bit 4

INTE: RB0/INT External Interrupt Enable bit

= Enables the RB0/INT external interrupt

= Disables the RB0/INT external interrupt

bit 3

RBIE: RB Port Change Interrupt Enable bit

= Enables the RB port change interrupt

= Disables the RB port change interrupt

bit 2

T0IF: TMR0 Overflow Interrupt Flag bit

= TMR0 register has overflowed (must be cleared in software)

= TMR0 register did not overflow

bit 1

INTF: RB0/INT External Interrupt Flag bit

= The RB0/INT external interrupt occurred (must be cleared in software)

= The RB0/INT external interrupt did not occur

bit 0

RBIF: RB Port Change Interrupt Flag bit

= At least one of the RB7:RB4 pins changed state; a mismatch condition will continue to set

the bit. Reading PORTB will end the mismatch condition and allow the bit to be cleared

(must be cleared in software).

= None of the RB7:RB4 pins have changed state

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

- n = Value at POR

’1’ = Bit is set

’0’ = Bit is cleared

x = Bit is unknown

PIC16F87X Datasheet(PDF) 20 Page - Microchip Technology

PIC16F87X Datasheet(HTML) 20 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL