MPF7100BVBA0ES datasheet(53/125 Pages) NXP

53 / 125 page

NXP Semiconductors

PF7100

7-channel power management integrated circuit for high performance applications

PF7100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 9 March 2021

53 / 125

The PF7100 is designed to operate as a slave device during I2C communication. The

default I2C device address is set by the OTP_I2C_ADD[2:0].

Table 35. I2C address configuration

OTP_I2C_ADD[2:0]

Device address

000

0x08

001

0x09

010

0x0A

011

0x0B

100

0x0C

101

0x0D

110

0x0E

111

0x0F

See http://www.nxp.com/documents/user_manual/UM10204.pdf for detailed information

on the digital I2C communication protocol implementation.

During an I2C transaction, the communication latches after the 8th bit sent. If the data

sent is not a multiple of 8 bit, any word with less than 8 bits are ignored. If only 7 bits are

sent, no data is written and the logic does not provide an ACK bit to the MCU.

From an IC level, a wrong I2C command can create a system level safety issue. For

example, though the MCU may have intended to set a given regulator’s output to 1.0 V, it

may be erroneously registered as 1.1 V due to noise in the bus.

To prevent a wrong I2C configuration, various protective mechanisms are implemented.

14.9.14.1 I2C CRC verification

When this feature is enabled, a selectable CRC verification is performed on each I2C

transaction.

• When OTP_I2C_CRC_EN = 0, the CRC verification mechanism is disabled.

• When OTP_I2C_CRC_EN = 1, the CRC verification mechanism is enabled.

After each I2C transaction, the device calculates the corresponding CRC byte to ensure

that the configuration command has not been corrupted.

When a CRC fault is detected, the PF7100 ignores the erroneous configuration

command and triggers a CRC_I interrupt asserting the INTB pin, provided the interrupt is

not masked.

The PF7100 implements a CRC-8-SAE, per the SAE J1850 specification.

• Polynomial = 0x11D

• Initial value = 0xFF

aaa-028696

MSB Data

I2C CRS Polynominal

Seed: 1 1 1 1 1 1 1 1

Figure 23. 8-bit SAE J1850 CRC polynomial

MPF7100BVBA0ES Datasheet(PDF) 53 Page - NXP Semiconductors

MPF7100BVBA0ES Datasheet(HTML) 53 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL