PIC18F1230-ESLASHML datasheet(3/312 Pages) MICROCHIP

3 / 312 page

Advance Information

DS39758B-page 1

14-Bit Power Control PWM Module:

• Up to 6 PWM channel outputs

- Complementary or independent outputs

• Edge or center-aligned operation

• Flexible dead-band generator

• Hardware Fault protection input

• Simultaneous update of duty cycle and period:

- Flexible Special Event Trigger output

Flexible Oscillator Structure:

• Four Crystal modes, up to 40 MHz

• 4x Phase Lock Loop (PLL) – available for crystal

and internal oscillators

• Two External RC modes, up to 4 MHz

• Two External Clock modes, up to 40 MHz

• Internal oscillator block:

- 8 user-selectable frequencies from 31 kHz

to 8 MHz

- Provides a complete range of clock speeds from

31 kHz to 32 MHz when used with PLL

- User-tunable to compensate for frequency drift

• Secondary oscillator using Timer1 @ 32 kHz

• Fail-Safe Clock Monitor:

- Allows for safe shutdown if peripheral clock stops

Power-Managed Modes:

• Run: CPU on, peripherals on

• Idle: CPU off, peripherals on

• Sleep: CPU off, peripherals off

• Idle mode currents down to 5.8

μA, typical

• Sleep mode current down to 0.1

μA, typical

• Timer1 Oscillator: 1.8

μA, typical; 32 kHz; 2V

• Watchdog Timer (WDT): 2.1

μA, typical

• Two-Speed Oscillator Start-up

Peripheral Highlights:

• High-current sink/source 25 mA/25 mA

• Up to 4 programmable external interrupts

• Four input change interrupts

• Enhanced Addressable USART module:

- Supports RS-485, RS-232 and LIN 1.2

- RS-232 operation using internal oscillator

block (no external crystal required)

- Auto-wake-up on Start bit

- Auto-Baud Detect

• 10-bit, up to 4-channel Analog-to-Digital Converter

module (A/D):

- Auto-acquisition capability

- Conversion available during Sleep

• Up to 3 analog comparators

• Programmable reference voltage for comparators

• Programmable 15-level Low-Voltage Detection

(LVD) module:

- Supports interrupt on Low-Voltage Detection

Special Microcontroller Features:

• C compiler optimized architecture with optional

extended instruction set

• Flash memory retention: > 40 years

• Self-programmable under software control

• Priority levels for interrupts

• 8 x 8 Single-Cycle Hardware Multiplier

• Extended Watchdog Timer (WDT):

- Programmable period from 4 ms to 131s

• Programmable Code Protection

• Single-Supply In-Circuit Serial Programming™

(ICSP™) via two pins

• In-Circuit Debug (ICD) via two pins

• Wide operating voltage range (2.0V to 5.5V)

Device

Program Memory

Data Memory

I/O

-Bit

ADC

Channel

EUSART

Analog

Comparator

14-Bit

PWM (ch)

Timers

16-Bit

Flash

(bytes)

# Single-Word

Instructions

SRAM

(bytes)

EEPROM

(bytes)

PIC18F1230

4096

2048

256

128

Yes

PIC18F1330

8192

4096

256

128

Yes

18/20/28-Pin, Enhanced Flash Microcontrollers with

nanoWatt Technology, High-Performance PWM and A/D

PIC18F1230/1330

PIC18F1230-E/ML Datasheet(PDF) 3 Page - Microchip Technology

PIC18F1230-E/ML Datasheet(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL