EMC326SP16AJS-90LL datasheet(6/64 Pages) EMLSI

6 / 64 page

EMC326SP16AJ

2Mx16 CellularRAM

Preliminary

General Description

CellularRAM products are high-speed, CMOS pseudo-static random access memory developed for low-power, portable applications.

The 32Mb CellularRAM device has a DRAM core organized as 2 Meg x 16 bits. These devices include an industry-standard burst

mode Flash interface that dramatically increase read/write bandwidth compared with other low-power SRAM or Pseudo SRAM offer-

ing.

To operate seamlessly on a burst Flash bus, CellularRAM products incorporate a transparent self refresh mechanism. The hidden

refresh requires no additional support from the system memory controller and has no significant impact on device READ/WRITE per-

formance.

Two user-accessible control registers define device operation. The bus configuration register (BCR) defines how the CellularRAM

device interacts with the system memory bus and is nearly identical to its counterpart on burst mode Flash devices. The refresh con-

figuration register (RCR) is used to control how refresh is performed on the DRAM array. These registers are automatically loaded

with default settings during power-up and can be updated anytime during normal operation.

Special attention has been focused on standby current consumption during self refresh. 32Mb CellularRAM products include three

mechanisms to minimize standby current. Partial array refresh (PAR) enables the system to limit refresh to only that part of the DRAM

array that contains essential data. Temperature compensated refresh (TCR) uses an onchip sensor to adjust the refresh rate to match

the device temperature-the refresh rate decreases at lower temperatures to minimize current consumption during standby. Deep

power-down (DPD) enables the system to halt the refresh operation altogether when no vital information is stored in the device. The

system configurable refresh mechanisms are accessed through the RCR.

This 32Mb CellularRAM devices is compliant with the industry-standard CellularRAM 1.5 feature set established by the CellularRAM

Workgroup. It includes support for both variable and fixed latency, with three output-device drive-strength settings, additional wrap

options, and a device ID register (DIDR).

Figure 1 : Functional Block Diagram - 2 meg x 16

Note: Functional block diagrams illustrate simplified device operation. See pin descriptions(Table 1); Bus operations table(Table 2); and timing diagrams

for detailed information.

Control

Logic

CLK

CE#

WE#

OE#

ADV#

CRE

LB#

UB#

WAIT

Address Decode

Logic

Refresh Configuration

Device ID Register

(DIDR)

Bus Configuration

2,048K x 16

DRAM

MEMORY

ARRAY

Input

Output

MUX

and

Buffers

DQ[7:0]

DQ[15:8]

A[20:0]

External

Internal

EMC326SP16AJS-90LL Datasheet(PDF) 6 Page - Emerging Memory & Logic Solutions Inc

EMC326SP16AJS-90LL Datasheet(HTML) 6 Page - Emerging Memory & Logic Solutions Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL