PIC18F1220ESLASHSOSQTP datasheet(80/308 Pages) MICROCHIP

80 / 308 page

PIC18F1220/1320

DS39605F-page 78

9.2

PIR Registers

The PIR registers contain the individual flag bits for the

peripheral interrupts. Due to the number of peripheral

interrupt sources, there are two Peripheral Interrupt

Request (Flag) registers (PIR1, PIR2).

PIR1: PERIPHERAL INTERRUPT REQUEST (FLAG) REGISTER 1

Note 1: Interrupt flag bits are set when an interrupt

condition occurs, regardless of the state of

its corresponding enable bit or the Global

Interrupt Enable bit, GIE (INTCON<7>).

2: User software should ensure the appropri-

ate interrupt flag bits are cleared prior to

enabling an interrupt and after servicing

that interrupt.

U-0

R/W-0

R-0

U-0

R/W-0

—

ADIF

RCIF

TXIF

—

CCP1IF

TMR2IF

TMR1IF

bit 7

bit 0

bit 7

Unimplemented: Read as ‘0’

bit 6

ADIF: A/D Converter Interrupt Flag bit

= An A/D conversion completed (must be cleared in software)

= The A/D conversion is not complete

bit 5

RCIF: EUSART Receive Interrupt Flag bit

= The EUSART receive buffer, RCREG, is full (cleared when RCREG is read)

= The EUSART receive buffer is empty

bit 4

TXIF: EUSART Transmit Interrupt Flag bit

= The EUSART transmit buffer, TXREG, is empty (cleared when TXREG is written)

= The EUSART transmit buffer is full

bit 3

Unimplemented: Read as ‘0’

bit 2

CCP1IF: CCP1 Interrupt Flag bit

Capture mode:

= A TMR1 register capture occurred (must be cleared in software)

= No TMR1 register capture occurred

Compare mode:

= A TMR1 register compare match occurred (must be cleared in software)

= No TMR1 register compare match occurred

PWM mode:

Unused in this mode.

bit 1

TMR2IF: TMR2 to PR2 Match Interrupt Flag bit

= TMR2 to PR2 match occurred (must be cleared in software)

= No TMR2 to PR2 match occurred

bit 0

TMR1IF: TMR1 Overflow Interrupt Flag bit

= TMR1 register overflowed (must be cleared in software)

= TMR1 register did not overflow

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

PIC18F1220E/SOSQTP Datasheet(PDF) 80 Page - Microchip Technology

PIC18F1220E/SOSQTP Datasheet(HTML) 80 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL