Advanced analysis options

Option

Description

Opt. BRR

BroadR-Reach/100BASE-T1 and 1000BASE-T1 Compliance Testing (Requires TF-GBE-BTP and TF-

BRR-CFD Test Fixtures) (For models of bandwidth ≥1 GHz only)

Opt. DDRA

DDR Memory Bus Analysis (Requires Opt. DJA) (For models of bandwidth ≥1 GHz only)

Opt. DJA

Jitter and Eye Analysis Tools – Advanced (DPOJET)

Opt. DJAN

DPOJET Noise, jitter, and eye analysis tools (Requires Opt. DJA)

Opt. D-PHY

Opt. DJA) (For models of bandwidth ≥2.5 GHz only)

Opt. ET3

Ethernet Compliance Test Software (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)

Opt. MOST

Electrical Compliance and Debug Test Solution for MOST50 and MOST150 (Requires Opt. DJA)

Opt. MTM

Mask Testing for ITU-T, ANSI T1.102, Ethernet, SONET/SDH, Fibre Channel, USB 2.0, IEEE 1394b,

Rapid I/O, OIF, CPRI, and Serial Video; (includes hardware clock recovery on DPO7254C/DPO7354C)

Opt. NBASE-T

TekExpress Automated NBASE-T and IEEE802.3bz (2.5G and 5G) Compliance Test Software (Requires

TF-XGbt Test Fixture) (For models of bandwidth ≥2.5 GHz only)

Opt. PWR

Power Measurement and Analysis Software

Opt. SR-AERO

Aerospace Serial Triggering and Analysis (MIL-STD-1553). Enables triggering on packet-level information

on MIL-STD-1553 buses as well as analytical tools such as bus views, packet decoding, search tools, and

packet decode tables with time stamp information

Opt. SR-AUTO

Automotive Serial Triggering and Analysis (CAN/LIN/FlexRay). Enables triggering on packet-level

information on CAN, LIN, and FlexRay buses as well as analytical tools such as digital views of the signal,

bus views, packet decoding, search tools, and packet decode tables with time stamp information

Opt. SR-COMP

Computer Serial Triggering and Analysis (RS-232/422/485/UART). Enables triggering on packet-level

information on RS-232/422/485/UART buses as well as analytical tools such as digital views of the signal,

bus views, packet decoding, search tools, and packet decode tables with time stamp information

Opt. SR-DPHY

as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with

time stamp information

Opt. SR-EMBD

and 2-wire and 3-wire SPI buses as well as analytical tools such as digital views of the signal, bus views,

packet decoding, search tools, and packet decode tables with time stamp information

Opt. SR-ENET

Ethernet Serial Analysis (10BASE-T, 100BASE-TX). Enables analysis of Ethernet buses as well as

analytical tools such as bus views, packet decoding, search tools, and packet decode tables with time

stamp information

Opt. SR-PCIE

PCI Express Serial Analysis. Enables analysis of PCI Express buses with analytical tools such as digital

views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp

information (For models of bandwidth ≥1 GHz only) (Due to large volumes of data, use of standard high-

capacity hard drive rather than the smaller SSD is recommended.)

Opt. SR-USB

USB 2.0 Serial Triggering and Analysis (LS, FS, HS). Enables triggering on packet-level content for low-

speed and full-speed USB serial buses. Also enables analytical tools such as bus views, packet decoding,

search tools, and packet decode tables with time stamp information for low-speed, full-speed, and high-

speed USB serial buses. USB High Speed supported only on ≥1 GHz models

Opt. SR-810B

8b/10b Serial Analysis. Enables analysis of 8b/10b buses with analytical tools such as digital views of the

signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information

Opt. ST1G

64-bit NRZ Serial Trigger and 8b/10b Serial Protocol Decode (includes Opt. SR-810B) (For models of

bandwidth ≥2.5 GHz only)

Opt. SVA

AM/FM/PM Audio Signal Analysis (Requires Opt. SVE)

Opt. SVE

Opt. SVM

Opt. SVO

Opt. SVP

Opt. SVT

DPO7000C Series Datasheet - DPO7000C Series

www.tek.com/DPO7000 21