Timebase stability (aperture

uncertainty), typical

<65 parts/trillion for record durations <10 s

Time base accuracy

±2.5 ppm + aging <1 ppm per year

Acquisition system

Acquisition modes

Sample

Acquires and displays sampled values

Peak detect

Captures and displays narrow glitches at all real-time sampling rates. Glitch widths: 1 ns at ≤10 GS/s

Averaging

From 2 to 10,000 waveforms can be included in an average waveform

Envelope

Hi-Res

Real-time boxcar averaging reduces random noise and increases resolution

Roll mode

Scrolls sequential waveform points across the display in a right-to-left rolling motion at sweep speeds slower than 50 ms/div.

Works at sample rates up to 10 MS/s with a maximum record length of 40 MS

all 4 channels simultaneously

Waveform database

Accumulates waveform data providing a three-dimensional array of amplitude, time, and counts

Acquisition memory divided into segments; maximum trigger rate >310,000 waveforms per second. Time of arrival recorded with

each event. Frame finder tool helps to visually identify transients

Trigger sensitivity

Internal DC coupled

0.7 div from DC to 50 MHz, increasing to 1.2 div at rated analog bandwidth (typical), up to 2.5 GHz. 2.5 div at 3.5 GHz

Aux input (external trigger)

1 MΩ

250 mV from DC to 50 MHz, increasing to 350 mV at 250 MHz (typical)

Trigger delay by time

3.2 ns to 3,000,000 s

Trigger delay by events

1 to 2,000,000,000 events

Main trigger modes

Auto, Normal, and Single

Enhanced triggering

Enhanced triggering corrects the difference in timing between the trigger path and the acquired data path (supports all Pinpoint

trigger types on both A- and B-Events except pattern trigger); Default On (user-selectable); Not available in FastAcq mode.

Trigger sequences

Main, Delayed by Time, Delayed by Events, Reset by Time, Reset by State, Reset by Transition, B Event Scan. All sequences can

include separate horizontal delay after the trigger event to position the acquisition window in time.

Communications-related triggers

Support for AMI, HDB3, BnZS, CMI, MLT3, and NRZ encoded communications signals. Select among isolated positive or negative

one, zero pulse form, or eye patterns as applicable to the standard. Requires Option MTM.

Video trigger formats and field

rates

Triggers from negative sync composite video, field 1 or field 2 for interlaced systems, any field, specific line, or any line for

interlaced or noninterlaced systems. Supported systems include NTSC, PAL, SECAM, and HDTV 1080/24sF, 1080p/25, 1080i/50,

1080i/60, 1080p/24, 720p/60, 480p/60

Serial pattern trigger

NRZ-Encoded Data

DPO7254C and DPO7354C only, requires Opt. ST1G. Up to 64 bit serial word recognizer, bits specified in binary (high, low, don't

care) or hex format. Trigger on NRZ-encoded data up to 1.25 GBaud.

DPO7000C Series Datasheet - DPO7000C Series

Horizontal system

www.tek.com/DPO7000 13