Capture – Triggering on a specific transmit data packet going across an RS-232 bus. A

complete set of triggers, including triggers for specific serial packet content, ensures you

quickly capture your event of interest.

To enable complex system debug and validation, the DPO7000C Series

to provide trigger performance up to the bandwidth of the oscilloscope and

over 1400 trigger combinations. Most other trigger systems offer multiple

trigger types only on a single event (A event), with the delayed trigger (B

event) selection limited to edge-type triggering, and often do not provide a

way to reset the trigger sequence if the B event doesn’t occur. But Pinpoint

triggering provides a full suite of advanced trigger types on both A and B

triggers with Reset triggering to begin the trigger sequence again after a

specified time, state, or transition so that even events in the most complex

signals can be captured.

Finding the right characteristic of a complex signal can require hours of

collecting and sorting through thousands of acquisitions for the event of

interest. Defining a trigger that isolates the desired event and shows data

only when the event occurs speeds up this process. Visual Trigger and

Search makes the identification of the desired waveform events quick and

easy by scanning through all waveform acquisitions and comparing them to

on-screen areas (geometric shapes).

With up to a 500 M point record length, you can capture many events of

interest, even thousands of serial packets, in a single acquisition for further

analysis while maintaining high resolution to zoom in on fine signal details.

Investigate multiple segments of your waveform capture simultaneously

Segmented Memory mode enables you to make efficient use of large

records by capturing many trigger events in a single record eliminating

large time gaps between events of interest. View and measure the

segments individually or as an overlay.

From triggering on specific packet content to automatic decode in multiple

data formats, the DPO7000C Series provides integrated support for a

RS-232/422/485/UART, MIL-STD-1553, Ethernet, USB 2.0, and MIPI D-

PHY. The ability to decode up to 16 serial buses simultaneously means you

gain insight into system-level problems quickly.

Search

Finding your event of interest in a long waveform record can be time

consuming without the right search tools. With today's record lengths

pushing beyond a million data points, locating your event can mean

scrolling through thousands of screens of signal activity.

Search – Results of an advanced search for a runt pulse or a narrow glitch within a long

waveform record. Each instance of the runt or glitch is automatically marked for easy

reference.

The DPO7000C Series offers the industry's most comprehensive search

and waveform navigation with the standard Advanced Search and Mark

feature and front-panel controls. User marks allow you to mark any location

that you may want to reference later for further investigation. Or,

automatically search your entire record for the criteria you define. Along the

way it will automatically mark every occurrence of your defined event so

you can quickly move between events. The advanced search and mark

capability of the DPO7000C Series can search for up to eight different

events simultaneously and stop a live acquisition when it finds an event of

interest, saving even more time.

Analyze

Verifying that your prototype's performance matches simulations and meets

the project's design goals requires analyzing its behavior. Tasks can range

from simple checks of rise times and pulse widths to sophisticated power

loss analysis, characterization of system clocks, and investigation of noise

sources. The DPO7000C Series offers a comprehensive set of integrated

analysis tools including waveform- and screen-based cursors,

53 automated measurements, advanced waveform math including arbitrary

equation editing, custom MATLAB and .NET math plug-in analysis

functions, waveform histograms, and FFT analysis.

DPO7000C Series Datasheet - DPO7000C Series

www.tek.com/DPO7000 3