SL2S3003FUD datasheet(34/82 Pages) NXP

34 / 82 page

NXP Semiconductors

SL2S3003/SL2S3003TT

ICODE 3 (TagTamper)

8.5 Supported commands

8.5.1 Mandatory commands

8.5.1.1 INVENTORY

The command is as defined in ISO/IEC 15693-3 [3].

Exception: If the Privacy or Destroy mode is enabled, the label does not respond.

8.5.1.2 STAY QUIET

The command is as defined in ISO/IEC 15693-3 [3].

8.5.2 Optional commands

8.5.2.1 READ SINGLE BLOCK

As defined in ISO/IEC 15693-3.

Option 0 (Option flag not set) is supported.

Option 1 (Option flag set) is supported.

If the related page of the addressed block is protected with the Read-Password, and if the password has not

been transmitted first with the SET PASSWORD command, the label responds according to the error handling

(see Section 8.6 "Error handling").

Note: Block 75 of the user memory is used for the 24-bit counter feature and must be used differently. Refer to

Section 8.5.3.25 "24-bit counter".

8.5.2.2 WRITE SINGLE BLOCK

As defined in ISO/IEC 15693-3.

Option 0 (Option flag not set) is supported.

Option 1 (Option flag set) is supported.

If the addressed block is part of a write protected page, or if the block is protected with the Read Password

only (see Section 8.5.3.6 "PROTECT PAGE"), and the password has not been transmitted first with the SET

PASSWORD command, the label responds according to the error handling (see Section 8.6 "Error handling").

Note: Block 75 of the user memory is used for the 24-bit counter feature and must be used differently. Refer to

Section 8.5.3.25 "24-bit counter".

SL2S3003/SL2S3003TT

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.0 — 28 March 2024

34 / 82

SL2S3003FUD Datasheet(PDF) 34 Page - NXP Semiconductors