SL2S3003FUD datasheet(58/82 Pages) NXP

58 / 82 page

NXP Semiconductors

SL2S3003/SL2S3003TT

ICODE 3 (TagTamper)

8.5.3.17 WRITE EAS ID

Command code = A7h

The command WRITE EAS ID stores a new EAS Identifier in the corresponding configuration memory. If EAS

is password protected (for Set and Reset EAS) the EAS password must be transmitted first with the SET

PASSWORD command.

The timing of the command is write alike.

Option 1 (Option flag set) is supported.

Option 0 (Option flag not set) is supported.

Also, a WRITE CONFIG command to block 18 of the configuration memory can write the EAS ID. See Table 9.

SOF

Flags

WRITE EAS

IC Mfg code

UID

EAS ID

value

CRC16

EOF

8 bits

64 bits

optional

16 bits

Table 105. WRITE EAS ID request format

SOF

Flags

Error code

CRC16

EOF

8 bits

16 bits

Table 106. WRITE EAS ID response format when Error_flag set

SOF

Flags

CRC16

EOF

8 bits

16 bits

Table 107. WRITE EAS ID response format when Error_flag NOT set

SL2S3003/SL2S3003TT

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.0 — 28 March 2024

58 / 82

SL2S3003FUD Datasheet(PDF) 58 Page - NXP Semiconductors

SL2S3003FUD Datasheet(HTML) 58 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

Datasheet Download

Link URL