SL2S3003FUD datasheet(62/82 Pages) NXP

62 / 82 page

NXP Semiconductors

SL2S3003/SL2S3003TT

ICODE 3 (TagTamper)

8.5.3.20 READ SIGNATURE

Command code = BDh

The READ SIGNATURE command returns an IC specific 32-byte or 48-byte ECC signature, to verify NXP

Semiconductors as the silicon vendor. The signature length is defined with the OS_CFG_MODE bit (Table 40).

The originality signature can also be read with a READ CONFIG command to

• blocks 0-7 if the 32 byte signature length is enabled or

• block 0-11 if the 48 byte signature length is enabled.

SOF

Flags

READ SIG

NATURE

IC Mfg code

UID

CRC16

EOF

8 bits

64 bits optional 16 bits

Table 115. READ SIGNATURE request format

SOF

Flags

Error code

CRC16

EOF

8 bits

16 bits

Table 116. READ SIGNATURE response format when Error_flag set

SOF

Flags

Originality Signature

CRC16

EOF

8 bits

256 or 384 bits

16 bits

Table 117. READ SIGNATURE response format when Error_flag NOT set

Details on how to check the signature value will be provided in the application note ICODE 3 Originality

Signature Validation. Thew document will describe how to verify the originality of ICODE 3.

SL2S3003/SL2S3003TT

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.0 — 28 March 2024

62 / 82

SL2S3003FUD Datasheet(PDF) 62 Page - NXP Semiconductors

SL2S3003FUD Datasheet(HTML) 62 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

Datasheet Download

Link URL