EVALAD5933EB datasheet(8/32 Pages) AD

8 / 32 page

EVAL-AD5933EB

Preliminary Technical Data

Rev. PrC | Page 8 of 32

GETTING STARTED

SETUP SEQUENCE SUMMARY

This installation was carried out using the Windows® XP

operating system with English (United States) settings. The

regional and language settings of the computer can be changed

in the Regional and Language Options directory within the

control panel (Start> Control Panel > Regional and Language

Options

). The installation consists of the following steps, which

are described in more detail in the sections that follow.

Install the AD5933 graphical user interface software on the

compact disc (CD) that accompanies the evaluation board.

Do not connect the USB cable from the AD5933 evaluation

board to the computer USB hub until the evaluation

software is properly installed. See the Step 1—Install the

Software section.

Connect the computer USB port to the evaluation board

using the USB cable provided in the evaluation kit, and run

the USB hardware installation wizard after the evaluation

software is installed correctly (the hardware installation

may happen automatically, depending on the current

operating system settings). See the Step 2—Connect the

USB Cable section.

Ensure that the appropriate links are made throughout the

evaluation board. Power up the evaluation board

appropriately prior to opening and running the evaluation

software program. See the Step 3—Verify the Links and

Power Up section.

Configure the main dialog box of the evaluation board

software to run the required sweep function. See the Step

4—Perform a Frequency Sweep section.

STEP 1—INSTALL THE SOFTWARE

Place the CD accompanying the evaluation board into the CD

drive of your computer and click the My Computer icon on the

desktop. Double-click the compact disc drive icon. Go to

AD5933 Installation

> Setup.exe (see Figure 4).

Figure 4. Evaluation Software CD Contents

Double-click Setup.exe and install the software onto the hard drive

of your computer through the installation wizard (see Figure 5). It

is recommended to install the software in the default destination

folder path, c\Program Files\Analog Devices\AD5933 (see

Figure 6).

The CD software installation may happen automatically after

the software CD is inserted into the disc drive, depending on

the current operating system settings.

Figure 5. Installation Wizard

Figure 6. Recommended Path to Install the Setup.exe Software

EVALAD5933EB Datasheet(PDF) 8 Page - Analog Devices

EVALAD5933EB Datasheet(HTML) 8 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Datasheet Download

Link URL