EVALAD5933EB datasheet(9/32 Pages) AD

9 / 32 page

Preliminary Technical Data

EVAL-AD5933EB

Rev. PrC | Page 9 of 32

Choose the Analog Devices directory (see Figure 7). If the

Analog Devices folder does not exist yet, create a folder called

Analog Devices and add the program icon to this new folder.

Figure 7. Evaluation Software Installation

After installing the software, remove the CD from the disc

drive. You may be asked to reboot the computer.

Go to Start > All Programs > Analog Devices > AD5933 >

AD5933

(see Figure 8).

Figure 8. Opening the Evaluation Software

The message shown in Figure 9 will appear. This error message

is to be expected because there is no USB connection between

the computer and the AD5933 evaluation board at this stage.

Therefore, the firmware code that the evaluation software operates

from, and which needs to be downloaded to the evaluation board

USB microcontroller memory each time the interface software

program is opened, cannot be successfully downloaded to the

evaluation board. Click Cancel and proceed to Step 2.

Figure 9. Expected Error Message

STEP 2—CONNECT THE USB CABLE

Plug one end of the USB cable into the computer USB hub and

connect the other end to the AD5933 evaluation board USB socket

(see J1 in Figure 37). A message may appear informing you that

a USB device has been detected on the host computer and that

new hardware has been found (see Figure 10).

Figure 10. USB Device Detected by Host Computer

The Found New Hardware Wizard dialog box appears (see

Figure 11). This wizard locates and installs the appropriate

driver files for the AD5933 evaluation kit in the operating

system registry. Select the Install the software automatically

(Recommended)

option in the main dialog box of the software

(

see Figure 11). Click Next to continue.

Figure 11. Hardware Installation Wizard

A standard Windows operating system warning message

appears, as shown in Figure 12. This indicates that the new

hardware (the AD5933 evaluation kit) being installed on the

Windows operating system has not passed the Windows logo

testing to verify compatibility with Windows XP. This warning

appears because the installation is an evaluation setup

installation and is not intended to be used in a production

environment. Click Continue Anyway and then click Finish.

EVALAD5933EB Datasheet(PDF) 9 Page - Analog Devices

EVALAD5933EB Datasheet(HTML) 9 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Datasheet Download

Link URL