MPC8308CVMADDA datasheet(5/95 Pages) NXP

5 / 95 page

MPC8308 PowerQUICC II Pro Processor Hardware Specification, Rev. 4

Freescale Semiconductor

Electrical Characteristics

This figure shows the undershoot and overshoot voltages at the interfaces of the device.

Figure 2. Overshoot/Undershoot Voltage for GVDD/NVDD/LVDD

2.1.3

Output driver characteristics

This table provides information on the characteristics of the output driver strengths.

2.1.4

Power sequencing

It is required to apply the core supply voltage (VDD) before the I/O supply voltages (GVDD, LVDD, and

NVDD) and assert PORESET before the power supplies fully ramp up. The core voltage supply must rise

to 90% of its nominal value before the I/O supplies reach 0.7 V; see Figure 3.

If this recommendation is not observed and I/O voltages are supplied before the core voltage, there might

be a period of time that all input and output pins are actively driven and cause contention and excessive

current. To overcome side effects of this condition, the application environment may require tuning of

external pull-up or pull-down resistors on particular signals to lesser values.

Table 3. Output Drive Capability

Driver Type

Output Impedance ()

Supply Voltage

Local bus interface utilities signals

NVDD = 3.3 V

DDR2 signals1

1 Output Impedance can also be adjusted through configurable options in DDR Control Driver Register (DDRCDR).

For more information, see the MPC8308 PowerQUICC II Pro Processor Reference Manual.

GVDD = 1.8 V

DUART, system control, I2C, JTAG, eSDHC, GPIO,SPI, USB

NVDD = 3.3 V

eTSEC signals

LVDD = 2.5/3.3 V

VSS

VSS – 0.3 V

VSS – 0.7 V

Not to Exceed 10%

G/L/NVDD + 20%

G/L/NVDD

G/L/NVDD + 5%

of tinterface

1. tinterface refers to the clock period associated with the bus clock interface.

VIH

VIL

Note:

MPC8308CVMADDA Datasheet(PDF) 5 Page - NXP Semiconductors

MPC8308CVMADDA Datasheet(HTML) 5 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95

Datasheet Download

Link URL