TDSUSBF datasheet(7/46 Pages) TEKTRONIX

7 / 46 page

Error detector

When performing receiver testing on a serial transceiver, a BER

measurement is often required. The MSO/DPO70000 series offer an

optional built-in error detector function for 8b/10b-encoded signals. The

built-in error detector comes with presets for testing PCIe, USB3.0, and

SATA signals up to 6 Gb/s. The error detector settings can be customized

to work with a generic 8b/10b-encoded signal and can be set to detect bit,

character, or frame errors. When an error is detected, the scope will trigger

and display the waveform bits where the error occurred.

RF and vector signal analysis

When vector signal analysis of RF or baseband signals is needed, the

optional SignalVu® application enables measurements in multiple domains

(frequency, time, phase, modulation) simultaneously. SignalVu®

measurements are fully correlated with the scope's time domain acquisition

and triggering. Time domain events, such as commands to an RF

subsystem, can be used as trigger events, while the subsystem's RF signal

can be seen in the frequency domain. SignalVu also provides wireless

standards measurements such as IEEE 802.11 a/b/g/j/p/n/ac that can be

correlated in the time domain 1.

SignalVu® Vector Signal Analysis – Easily verify wide-bandwidth designs such as

wideband radar, high data-rate satellite links, WLAN 802.11, or frequency-hopping radios

and characterize wideband spectral events. SignalVu® combines the functionality of a

vector signal analyzer, a spectrum analyzer, and the powerful triggering capabilities of

the MSO/DPO70000 Series – all in a single package.

TekExpress® software automation framework

The TekExpress® software automation framework has been developed for

automated one-button testing of high-speed serial data standards.

TekExpress® efficiently executes the required tests for many serial

standards such as SATA, SAS, MIPI® C-PHY, MIPI® D-PHY, MHL, MIPI®

M-PHY, PCI Express®, USB 3.0, DisplayPort, and 10GBASE-T Ethernet.

Run on an external Windows PC, the TekExpress® software orchestrates

the instrument setup and control sequences to provide complete test

results for complete design validation.

Beyond using the TekExpress® framework, custom applications that you

develop yourself using application development environments such as

MATLAB® can further extend the tool set of the MSO/DPO70000 Series.

Characterization measurements depend upon accuracy and repeatability.

The wide bandwidth and unmatched signal fidelity of the MSO/DPO70000

analog front end ensures that your signal quality measurements such as

rise times are faithful and amplitude correct with flatness of ±0.5 dB.

TekExpress® USB 3.0 Automated Test Software (Option USB-TX) – TekExpress®

USB 3.0 provides an automated, simple, and efficient way to test USB 3.0 transmitter

and receiver hosts and devices consistent with the requirements of the SuperSpeed

Universal Serial Bus Electrical Compliance Test Specification. The application automates

selection of appropriate fixture de-embed, CTLE and reference channel emulation filters

and measurement selections based on device type, test type, test points, and selected

probes. In addition, USB-TX leverages DPOJET allowing debug and advanced

characterization of USB 3.0 solutions.

Also check http://www.tek.com/signalvu for the latest information.

Digital and Mixed Signal Oscilloscopes – MSO/DPO70000 Series

TDSUSBF Datasheet(PDF) 7 Page - TEKTRONIX, INC.

TDSUSBF Datasheet(HTML) 7 Page - TEKTRONIX, INC.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Datasheet Download

Link URL