TDSUSBF datasheet(13/46 Pages) TEKTRONIX

13 / 46 page

Certification

This is the start of your concept. Before a product can go to market, you

often need to complete a series of certification tests on the industry-

standard high-speed serial buses in your design. These tests can involve

many hours of wrestling with test fixtures, reading certification documents,

and collecting sufficient data to validate that your system passes the

required tests.

MSO70000 – A dedicated solution configured for

today's high-speed serial design challenges

The MSO70000 Mixed Signal Oscilloscopes are specially configured to

address high-speed serial data designs by encapsulating many of the serial

domain features needed for high-speed serial verification and

characterization. These standard features on the MSO70000 Series are

options on the DPO70000 Series.

Serial pattern triggering – Real-time serial pattern triggering and protocol

decode with built-in clock recovery recovers the clock signal, identifies the

transitions, and decodes characters and other protocol data. You can see

the 8b/10b bit sequences decoded into their words for convenient analysis,

and set the desired encoded words for the serial pattern trigger to capture.

With pattern lock triggering, the MSO70000 Series can synchronize to long

serial test patterns with data rates up to 6.25 Gb/s and remove random

jitter.

DPOJET jitter, timing, and eye diagram analysis – The MSO70000

Series features the highest-accuracy jitter and timing measurements as

well as comprehensive analysis algorithms. Tight timing margins demand

stable, low-jitter designs. You can make jitter measurements over

contiguous clock cycles on every valid pulse in a single-shot acquisition.

Multiple measurements and trend plots quickly show system timing under

variable conditions, including Random, Deterministic, and Bounded

Uncorrelated Jitter separation.

Communications mask testing – Provides a complete portfolio of masks

for verifying compliance to serial communications standards. Over

150 masks including the following standards are supported – PCI

Express®, ITU-T/ANSI T1.102, Ethernet IEEE 802.3, ANSI X3.263, Sonet/

SDH, Fibre Channel, InfiniBand, USB, Serial ATA, Serial Attached SCSI,

IEEE 1394b, RapidIO, OIF Standards, Open Base Station Architecture

Initiative (OBSAI), Common Public Radio Interface (CPRI).

Communications mask testing.

62 MS record length – 62 MS on all four channels provides a longer time

sequence at high resolution. Optional record lengths up to 125 MS for the

4, 6, and 8 GHz models, 250 MS for the 12.5 through 20 GHz models and

500 MS (4 channels)/1 GS (2 channels) on 23 to 33GHz models extend the

acquisition time sequence.

With standard features that extend the functionality of the Tektronix

DPO70000 Series to address high-speed serial signal analysis and

certification, the MSO70000 Series offers a specialized instrument that

efficiently addresses your design challenges.

Protocol Decode for High Speed Serial buses

The MSO/DPO70000 Series oscilloscopes provide optional protocol

analysis for HSS buses such as PCI Express gen 1/2/3, MIPI D-PHY (CSI,

DSI) and 8b/10b-encoded buses. With these capabilities, bit sequences

can be decoded into familiar commands and data packets for faster

analysis. With the PCI Express decoder, the data is displayed in a protocol-

aware view using characters and terms from the standard, such as the

ordered sets: SKP, Electrical Idle, and EIEOS

Table View of the Bus Protocol. The results table provides a protocol view of the bus and

with a mouse click allows correlation of what is happening in the physical layer to what is

happening in the protocol layers.

Digital and Mixed Signal Oscilloscopes – MSO/DPO70000 Series

TDSUSBF Datasheet(PDF) 13 Page - TEKTRONIX, INC.

TDSUSBF Datasheet(HTML) 13 Page - TEKTRONIX, INC.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Datasheet Download

Link URL