R5F526TACDFM datasheet(64/142 Pages) RENESAS

64 / 142 page

R01DS0407EJ0120 Rev.1.20

Page 64 of 142

Oct 31, 2024

RX26T Group

2. Electrical Characteristics

Note 1. Supply current values are measured when all output pins are unloaded and all input pull-up resistors are disabled.

Note 2. Peripheral module clocks are supplied. This does not include operations as BGO (background operations).

Note 3. ICC depends on f (ICLK) as follows.

• D version product

ICC Max. = 0.283 × f + 13 (full operation in normal operating mode)

ICC Typ. = 0.107 × f + 4.3 (normal operation in normal operating mode)

ICC Max. = 0.100 × f + 13 (sleep mode)

• G version product

ICC Max. = 0.285 × f + 17.8 (full operation in normal operating mode)

ICC Typ. = 0.107 × f + 4.3 (normal operation in normal operating mode)

ICC Max. = 0.093 × f + 17.8 (sleep mode)

Note 4. This does not include operations as BGO (background operations). Whether the peripheral module clocks are supplied or

stopped is controlled only by the bit settings in the module stop control registers A to D.

Note 5. When peripheral module clocks are stopped, each clock frequency is set for division by 64, and the frequencies of FCLK,

PCLKA, PCLKB, PCLKC, and PCLKD are the same.

Note 6. This is an increase caused by program/erase operation to the code flash memory or data flash memory during executing the

user program.

Table 2.7

DC Characteristics (3) (Products with 48 Kbytes of RAM)

Conditions: VCC = 2.7 to 5.5 V, AVCC0 = AVCC1 = AVCC2 = 3.0 to 5.5 V, VSS = AVSS0 = AVSS1 = AVSS2 = 0 V,

Ta = Topr

Item

Symbol

D version

G version

Unit

Test Conditions

Typ.

Max.

Typ.

Max.

Supply

current*1

Full operation*2

ICC*3

—

ICLK = 120 MHz

PCLKA = 120 MHz

PCLKB = 60 MHz

PCLKC = 120 MHz

PCLKD = 60 MHz

FCLK = 60 MHz

Normal

operation

Peripheral module clocks are

supplied*4

—

Peripheral module clocks are

stopped*4, *5

—

CoreMark

Peripheral module clocks are

stopped*4, *5

—

Sleep mode: Peripheral module clocks are

supplied*4

All module clock stop mode (reference

value)

7.4

Increase current by BGO operation*6

—

Software standby mode

0.9

R5F526TACDFM Datasheet(PDF) 64 Page - Renesas Technology Corp

R5F526TACDFM Datasheet(HTML) 64 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL