ST7265X datasheet(132/166 Pages) STMICROELECTRONICS

Part #	ST7265X

Description	LOW-POWER, FULL-SPEED USB 8-BIT MCU WITH 32K FLASH, 5K RAM, FLASH CARD I/F, TIMER, PWM, ADC, I2C, SPI

PDF	166 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

132 / 166 page

ST7265x

132/166

13.4 SUPPLY CURRENT CHARACTERISTICS

The following current consumption specified for

the ST7 functional operating modes over tempera-

ture range does not take into account the clock

source current consumption. To get the total de-

vice consumption, the two current values must be

added (except for HALT mode for which the clock

is stopped).

13.4.1 RUN Mode

Figure 75. Typical IDD in RUN vs. fCPU

Notes:

1. Typical data are based on TA=25°C, VDD=5V (4.0V≤VDD≤5.5V range) and VDD=3.3V (2.7V≤VDD≤4.0V range).

2. Data based on characterization results, tested in production at VDD =5.5V. and fCPU = 8MHz

3. CPU running with memory access, all I/O pins in input mode with a static value at VDD or VSS (no load), all peripherals

in reset state; clock input (OSC1) driven by external square wave, LVD disabled.

Symbol

Parameter

Conditions

Typ 1)

Max 2)

Unit

IDD

Supply current in RUN mode 3)

(see Figure 75)

fCPU=8MHz

Supply current in RUN mode 3)

(see Figure 75)

fCPU=3MHz

234

Vdd (V)

8 MHz

6 MHz

3 MHz

ST7265X Datasheet(PDF) 132 Page - STMicroelectronics