HC705JJ7GRSSLASHD datasheet(55/230 Pages) NXP

55 / 230 page

Interrupts

Core Timer Interrupts

MC68HC705JJ7/MC68HC705JP7 — Rev. 3.0

General Release Specification

Interrupts

IRQR — Interrupt Request Reset

This write-only bit clears the IRQF flag bit and prevents redundant

execution of interrupt routines. Writing a logic one to IRQR clears the

IRQF. Writing a logic zero to IRQR has no effect. IRQR always reads

as a logic zero. Reset has no affect on IRQR.

1 = Clear IRQF ﬂag bit

0 = No effect

4.7 Core Timer Interrupts

The core timer can generate the following interrupts:

•

Timer overflow interrupt

•

Real-time interrupt

Setting the I bit in the condition code register disables core timer

interrupts. The controls and flags for these interrupts are in the core

timer status and control register (CTSCR) located at $0008.

4.7.1 Core Timer Overflow Interrupt

An overflow interrupt request occurs if the core timer overflow flag (TOF)

becomes set while the core timer overflow interrupt enable bit (TOFE) is

also set. The TOF flag bit can be reset by writing a logical one to the

CTOFR bit in the CTSCR or by a reset of the device.

4.7.2 Real-Time Interrupt

A real-time interrupt request occurs if the real-time interrupt flag (RTIF)

in the CTSCR becomes set while the real-time interrupt enable bit

(RTIE) is also set. The RTIF flag bit can be reset by writing a logical one

to the RTIFR bit in the CTSCR or by a reset of the device.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

HC705JJ7GRS/D Datasheet(PDF) 55 Page - NXP Semiconductors