UPSD3312D datasheet(47/272 Pages) STMICROELECTRONICS

47 / 272 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

UPSD33xx

8032 addressing modes

Doc ID 9685 Rev 7

47/272

9.4

Immediate addressing

This mode uses 8-bits of data (a constant) contained in the second byte of the instruction,

and stores it into the memory location or register indicated by the first byte of the instruction.

Thus, the data is immediately available within the instruction. This mode is commonly used

to initialize registers and SFRs or to perform mask operations.

There is also a 16-bit version of this mode for loading the DPTR register. In this case, the

two bytes following the instruction byte contain the 16-bit value. For example:

9.5

External direct addressing

This mode will access external memory (XDATA) by using the 16-bit address stored in the

DPTR register. There are only two instructions using this mode and both use the

accumulator to either receive a byte from external memory addressed by DPTR or to send a

byte from the accumulator to the address in DPTR. The UPSD33xx has a special feature to

alternate the contents (source and destination) of DPTR rapidly to implement very efficient

memory-to-memory transfers. For example:

Note:

See details in Section 11: Dual data pointers on page 56.

9.6

External indirect addressing

This mode will access external memory (XDATA) by using the 8-bit address stored in either

only 8-bits are available for address, this mode limits XDATA to a size of only 256 bytes (the

traditional Port 2 of the 8032 MCU is not available in the UPSD33xx, so it is not possible to

write the upper address byte).

This mode is not supported by UPSD33xx.

For example:

MOV A, @R0

; Move into the accumulator the

; contents of IDATA SRAM that is

; pointed to by the address

; contained in R0.

MOV A, 40#

; Move the constant, 40h, into

; the accumulator

MOV DPTR, 1234#

; Move the constant, 1234h, into

; DPTR

MOVX A, @DPTR

; Move contents of accumulator to

; XDATA at address contained in

; DPTR

MOVX @DPTR, A

; Move XDATA to accumulator

UPSD3312D Datasheet(PDF) 47 Page - STMicroelectronics

UPSD3312D Datasheet(HTML) 47 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL