| Electronic Components Datasheet Search |
|
PIC32MM0016GPL028 Datasheet(PDF) 69 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC32MM0016GPL028 Datasheet(HTML) 69 Page - Microchip Technology |
|
69 / 268 page ![]() 2015-2016 Microchip Technology Inc. DS60001324B-page 69 PIC32MM0064GPL036 FAMILY bit 10-8 NOSC<2:0>: New Oscillator Selection bits(3) 111 and 110 = Reserved (selects internal Fast RC (FRC) Oscillator divided by FRCDIV<2:0> bits (FRCDIV)) 101 = Internal Low-Power RC (LPRC) Oscillator 100 = Secondary Oscillator (SOSC) 011 = Reserved 010 = Primary Oscillator (POSC) (XT, HS or EC) 001 = System PLL (SPLL) 000 = Internal Fast RC (FRC) Oscillator divided by FRCDIV<2:0> bits (FRCDIV) On Reset, these bits are set to the value of the FNOSC<2:0> Configuration bits (FOSCSEL<2:0>). bit 7 CLKLOCK: Clock Selection Lock Enable bit 1 = Clock and PLL selections are locked 0 = Clock and PLL selections are not locked and may be modified bit 6-5 Unimplemented: Read as ‘0’ bit 4 SLPEN: Sleep Mode Enable bit 1 = Device will enter Sleep mode when a WAIT instruction is executed 0 = Device will enter Idle mode when a WAIT instruction is executed bit 3 CF: Clock Fail Detect bit 1 = FSCM has detected a clock failure 0 = No clock failure has been detected bit 2 Unimplemented: Read as ‘0’ bit 1 SOSCEN: Secondary Oscillator (SOSC) Enable bit(4) 1 = Enables Secondary Oscillator 0 = Disables Secondary Oscillator bit 0 OSWEN: Oscillator Switch Enable bit(2) 1 = Initiates an oscillator switch to a selection specified by the NOSC<2:0> bits 0 = Oscillator switch is complete REGISTER 8-1: OSCCON: OSCILLATOR CONTROL REGISTER(1) (CONTINUED) Note 1: Writes to this register require an unlock sequence. Refer to Section 23.4 “System Registers Write Protection” for details. 2: The Reset value for this bit depends on the setting of the IESO (FOSCSEL<7>) Configuration bit. When IESO = 1, the Reset value is ‘1’. When IESO = 0, the Reset value is ‘0’. 3: The Reset value for these bits matches the setting of the FNOSC<2:0> (FOSCSEL<2:0>) Configuration bits. 4: The Reset value for this bit matches the setting of the SOSCEN (FOSCSEL<6>) Configuration bit. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |