L99DZ70XP datasheet(38/47 Pages) STMICROELECTRONICS

Part #	L99DZ70XP

Description	Door actuator driver

PDF	47 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

38 / 47 page

SPI - control and status registers

L99DZ70XP

38/47

Doc ID 15162 Rev 3

5.5

Status register 0

Table 29.

Status register 0 (read)

Bit

Name

Comment

OUT1 – HS OC

In case of an over-current event the corresponding status bit is set and the

output driver is disabled. If the over-current Recovery Enable bit is set the

output will be automatically reactivated after a delay time resulting in a

PWM modulated current with a programmable duty cycle.

If the over-current recovery bit is not set, the micro controller has to clear

the over-current bit to reactivate the output driver.

OUT1 – LS OC

OUT2 – HS OC

OUT2 – LS OC

OUT3 – HS OC

OUT3 – LS OC

OUT4 – HS OC

OUT4 – LS OC

OUT5 – HS OC

OUT5 – LS OC

OUT6 – HS OC

OUT6 – LS OC

Reserved

L99DZ70XP Datasheet(PDF) 38 Page - STMicroelectronics