| Electronic Components Datasheet Search |
|
AX88180 Datasheet(PDF) 22 Page - ASIX Electronics Corporation |
|
|
|||||||||||||||||||||||||||||
AX88180 Datasheet(HTML) 22 Page - ASIX Electronics Corporation |
|
22 / 47 page ![]() AX88180 22 ASIX ELECTRONICS CORPORATION 1 = enable 0 = disable 12 GIGA_EN R/W 0 Gigabit Mode Enable When this bit is enabled, MAC will operate in 1000Mbps mode. 1 = enable 0 = disable 11 RXJUMBO R/W 0 RX Jumbo Enable When this bit is enabled, MAC will receive jumbo package 1 = enable 0 = disable 10:7 RXJUBOLEN R/W 0000 Length Limit of received Jumbo package This field defines the maximum length of received jumbo package. 0001: 1K bytes 0010: 2K bytes 0011: 3K bytes --------------------- 1110: 14K bytes 1111: 15K bytes 6 DUPLEX R/W 0 Duplex Mode. 1 = Full-Duplex mode 0 = Half-Duplex mode 5 TXFLW_EN R/W 0 TX Flow Enable When this bit is enabled, MAC will block the transmitted operation when it captures pause frame from Ethernet. The re-transmission will be activated until the waiting time is expired. 1 = enable 0 = disable 4:2 - R/W 000 Reserved, must set to ‘0s’ for normal operation 1 RGMIIEN R/W 0 RGMII Mode Enable When this bit is enabled, AX88180 will operate in RGMII interface. Driver must set external PHY to RGMII mode and enable this bit in initial stage. Driver also must set RGMII interface of external PHY with add-delay timing in its internal. 1 = enable 0 = disable 0 - R/W 0 Reserved, must set to ‘0s’ for normal operation 4.16 MAC_CFG2--MAC Configuration2 Register Offset Address = 0xFC48 Default = 0x0000_0100 Field Name Type Default Description 15:8 - R/W 0x01 Reserved, keep this field in default value for normal operation. 7:2 JamLT R/W 000000 Define Jam Limit for backpressure collision account. Normally set this field at 0x19. It can avoid HUB port going to partition state due to too many collisions. AX88180 will skip one frame collision backpressure when collision counter equal to JamLT. The collision count will be reset to zero when every transmit frame with no collision or receive a frame with no backpressure collision. 1:0 - R/W 00 Reserved, must set to ‘00’ for normal operation |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |