TLK3114SCZPV datasheet(48/68 Pages) TI1

48 / 68 page

3−30

Table 3−23. Channel Status Register (Register 22)

BIT(S)

NAME

DESCRIPTION

READ/WRITE

Channel D transmit FIFO collision error

1 = Collision error is detected to cause the transmit FIFO self reset.

0 = No error (default)

After being read, this bit is reset to 0.

Read-only

Channel C transmit FIFO collision error

1 = Collision error is detected to cause the transmit FIFO self reset.

0 = No error (default)

After being read, this bit is reset to 0.

Read-only

Channel B transmit FIFO collision error

1 = Collision error is detected to cause the transmit FIFO self reset.

0 = No error (default)

After being read, this bit is reset to 0.

Read-only

Channel A transmit FIFO collision error

1 = Collision error is detected to cause the transmit FIFO self reset.

0 = No error (default)

After being read, this bit is reset to 0.

Read-only

Channel D decode error

1 = Code word or running disparity error detected.

0 = No error (default)

After being read, this bit is reset to 0.

Read-only

Channel C decode error

1 = Code word or running disparity error detected.

0 = No error (default)

After being read, this bit is reset to 0.

Read-only

Channel B decode error

1 = Code word or running disparity error detected.

0 = No error (default)

After being read, this bit is reset to 0.

Read-only

Channel A decode error

1 = Code word or running disparity error detected.

0 = No error (default)

After being read, this bit is reset to 0.

Read-only

Channel D PRBS pass

1 = PRBS testing passes without error (default).

0 = Error is detected during PRBS test.

After PRBS_PASS has been cleared, reading this bit sets it to 1.

Read-only

Channel C PRBS pass

1 = PRBS testing passes without error (default).

0 = Error is detected during PRBS test.

After PRBS_PASS has been cleared, reading this bit sets it to 1.

Read-only

Channel B PRBS pass

1 = PRBS testing passes without error (default).

0 = Error is detected during PRBS test.

After PRBS_PASS has been cleared, reading this bit sets it to 1.

Read-only

Channel A PRBS pass

1 = PRBS testing passes without error (default).

0 = Error is detected during PRBS test

After PRBS_PASS has been cleared, reading this bit sets it to 1.

Read-only

Channel D LOS output

1 = LOS condition is reported.

0 = No LOS (default)

After being read, this bit is reset to 0.

Read-only

Channel C LOS output

1 = LOS condition is reported.

0 = No LOS (default)

After being read, this bit is reset to 0.

Read-only

Channel B LOS output

1 = LOS condition is reported.

0 = No LOS (default)

After being read, this bit is reset to 0.

Read-only

Channel A LOS output

1 = LOS condition is reported.

0 = No LOS (default)

After being read, this bit is reset to 0.

Read-only

TLK3114SCZPV Datasheet(PDF) 48 Page - Texas Instruments

TLK3114SCZPV Datasheet(HTML) 48 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Datasheet Download

Link URL