ADIS16IMU5SLASHPCBZ datasheet(9/46 Pages) AD

9 / 46 page

Data Sheet

ADIS16575/ADIS16576/ADIS16577

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 9 of 46

Table 8. Absolute Maximum Ratings

Parameter

Rating

Mechanical Shock Survivability

Any Axis, Unpowered

2000 g

Any Axis, Powered

2000 g

VDD to GND

−0.3 V to +3.6 V

Digital Input Voltage to GND

−0.3 V to VDD + 0.2 V

Digital Output Voltage to GND

−0.3 V to VDD + 0.2 V

Temperature

Calibration Range

−40°C to +85°C

Operating Range

−40°C to +105°C

Storage Range1

−55°C to +150°C

Barometric Pressure

2 bar

1 Extended exposure to temperatures lower than −40°C or higher than +105°C

can adversely affect the accuracy of the factory calibration.

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Pay careful attention to

PCB thermal design.

The ADIS16575/ADIS16576/ADIS16577 are a multichip module,

which includes many active components. The values Table 9 in

identify the thermal response of the hottest component inside of

the ADIS16575/ADIS16576/ADIS16577, with respect to the overall

power dissipation of the module. This approach enables a simple

method for predicting the temperature of the hottest junction, based

on either ambient or case temperature.

For example, when the TC = 29.3°C (case temperature of the

hottest component), the hottest junction inside of the ADIS16575/

ADIS16576/ADIS16577 is 29.33°C.

TJ = θJC × PD + 29.3°C

TJ = 1°C/W × 0.027 W + 29.3°C

TJ = 29.33°C

Table 9. Package Characteristics

Package Type1

θJA2

θJC3

Mass (g)

ML-14-10

53.3°C/W

7.27°C/W

<11

1 Thermal impedance simulated values come from a case when 4 M2 × 0.4 mm

machine screws (torque = 20 inch ounces) secure the ADIS16575/ADIS16576/

ADIS16577 to the PCB.

2 θJA is the natural convection junction to ambient thermal resistance measured

in a one cubic foot sealed enclosure.

3 θJC is the junction to case thermal resistance.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.

ADIS16IMU5/PCBZ Datasheet(PDF) 9 Page - Analog Devices

ADIS16IMU5/PCBZ Datasheet(HTML) 9 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Datasheet Download

Link URL