ATmega64A datasheet(74/392 Pages) ATMEL

74 / 392 page

8160C–AVR–07/09

ATmega64A

Table 13-2 summarizes the function of the overriding signals. The pin and port indexes from Fig-

ure 13-5 are not shown in the succeeding tables. The overriding signals are generated internally

in the modules having the alternate function.

The following subsections shortly describe the alternate functions for each port, and relate the

overriding signals to the alternate function. Refer to the alternate function description for further

details.

Table 13-2.

Generic Description of Overriding Signals for Alternate Functions

Signal

Name

Full Name

Description

PUOE

Pull-up Override

Enable

If this signal is set, the pull-up enable is controlled by the PUOV

signal. If this signal is cleared, the pull-up is enabled when {DDxn,

PORTxn, PUD} = 0b010.

PUOV

Pull-up Override Value

If PUOE is set, the pull-up is enabled/disabled when PUOV is

set/cleared, regardless of the setting of the DDxn, PORTxn, and

PUD Register bits.

DDOE

Data Direction

Override Enable

If this signal is set, the Output Driver Enable is controlled by the

DDOV signal. If this signal is cleared, the Output driver is enabled

by the DDxn Register bit.

DDOV

Data Direction

Override Value

If DDOE is set, the Output Driver is enabled/disabled when DDOV

is set/cleared, regardless of the setting of the DDxn Register bit.

PVOE

Port Value Override

Enable

If this signal is set and the Output Driver is enabled, the port value

is controlled by the PVOV signal. If PVOE is cleared, and the

Output Driver is enabled, the port Value is controlled by the

PORTxn Register bit.

PVOV

Port Value Override

Value

If PVOE is set, the port value is set to PVOV, regardless of the

setting of the PORTxn Register bit.

DIEOE

Digital Input Enable

Override Enable

If this bit is set, the Digital Input Enable is controlled by the DIEOV

signal. If this signal is cleared, the Digital Input Enable is

determined by MCU state (Normal mode, sleep modes).

DIEOV

Digital Input Enable

Override Value

If DIEOE is set, the Digital Input is enabled/disabled when DIEOV

is set/cleared, regardless of the MCU state (Normal mode, sleep

modes).

Digital Input

This is the Digital Input to alternate functions. In the figure, the

signal is connected to the output of the Schmitt Trigger but before

the synchronizer. Unless the Digital Input is used as a clock

source, the module with the alternate function will use its own

synchronizer.

AIO

Analog Input/output

This is the Analog Input/output to/from alternate functions. The

signal is connected directly to the pad, and can be used bi-

directionally.

ATmega64A Datasheet(PDF) 74 Page - ATMEL Corporation

ATmega64A Datasheet(HTML) 74 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL