7643 datasheet(69/424 Pages) RENESAS

69 / 424 page

Rev.2.00

Aug 28, 2006

page 52 of 103

REJ09B0133-0200

OVERVIEW

FUNCTIONAL DESCRIPTION

7643 Group

[USB Endpoint x (x = 1, 2) IN Control Register] IN_CSR

This register contains the control and status information of the re-

spective IN Endpoints 1, 2.

Set the IN_PKT_RDY bit to “1” after the data packet has been

written to the IN FIFO. This bit is cleared to “0” when the data

transfer is completed. In a bulk IN transfer, this bit is cleared when

an ACK signal is received from the host. If an ACK signal is not re-

ceived, this bit (and the TX_NOT_EMPTY bit) remains as “1”. This

same data packet is sent after the next IN token is received. The

FLUSH bit is for flushing the data in the IN FIFO.

Fig. 44 Structure of USB endpoint x (x = 1, 2) IN control register

USB endpoint x IN control register (address 005916)

IN_CSR

INT_PKT_RDY bit (INXCSR0)

0: End of a data packet transmission (Note 1)

1: Write “1” at completion of writing a data packet into IN FIFO. (Note 3)

Reserved bit (“0” at read/write)

SEND_STALL bit (INXCSR2) (Note 2)

0: Except the following condition

1: Transmitting STALL handshake signal

TOGGLE_INIT bit (INXCSR3) (Note 2)

0: Except the following condition

1: Initializing the data toggle sequence bit

INTPT bit (INXCSR4) (Note 2)

0: Except the following condition

1: Initializing to endpoint used for interrupt transfer, rate feedback

TX_NOT_EPT flag (INXCSR5) (Note 1)

0: Empty in IN FIFO

1: Full in IN FIFO

FLUSH bit (INXCSR6)

0: Except the following condition (Note 4)

1: Flush FIFO. (Note 4)

AUTO_SET bit (INXCSR7) (Note 2)

0: AUTO_SET disabled

1: AUTO_SET enabled (Note 5)

Notes 1: This bit is automatically set to “1” or cleared to “0”.

2: The user must program to “1” or “0”.

3: When AUTO_SET bit is “0”, the user must set to “1”.

When AUTO_SET bit is “1”, this bit is automatically set to “1”.

4: This bit is automatically cleared to “0” after setting “1”.

5: To use the AUTO_SET function for an IN transfer when the AUTO_SET bit is set to “1”, set

the FIFO to single buffer mode.

7643 Datasheet(PDF) 69 Page - Renesas Technology Corp

7643 Datasheet(HTML) 69 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL