| Electronic Components Datasheet Search |
|
MCP37D11-80E/TE Datasheet(PDF) 11 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP37D11-80E/TE Datasheet(HTML) 11 Page - Microchip Technology |
|
11 / 136 page ![]() 2020 Microchip Technology Inc. DS20006381A-page 11 MCP37D11-80: 80 MSPS 12-BIT PIPELINED ADC 2.0 ELECTRICAL SPECIFICATIONS 2.1 Absolute Maximum Ratings† Analog and Digital Supply Voltage (AVDD12, DVDD12) .....................................................................................................-0.3V to 1.32V Analog and Digital Supply Voltage (AVDD18, DVDD18) .....................................................................................................-0.3V to 1.98V All Inputs and Outputs with respect to GND ...................................................................................................... -0.3V to AVDD18 +0.3V Differential Input Voltage ................................................................................................................................................ |AVDD18 -GND| Current at Input Pins .................................................................................................................................................................... ±2 mA Current at Output and Supply Pins ......................................................................................................................................... ±250 mA Storage Temperature ................................................................................................................................................... -65°C to +150°C Ambient Temperature with Power Applied (TA)............................................................................................................ -55°C to +125°C Maximum Junction Temperature (TJ)..........................................................................................................................................+150°C ESD Protection.............................................................. 2 kV HBM on all pins, CDM: 750V on corner pins and 250V on all other pins Solder Reflow Profile .............................................................................................. See Microchip Application Note AN233 (DS00233) 2.2 Electrical Specifications Notice†: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. TABLE 2-1: ELECTRICAL CHARACTERISTICS Electrical Specifications: Unless otherwise specified, all parameters apply for TA = -40°C to +125°C, AVDD18 =DVDD18 =1.8V, AVDD12 =DVDD12 = 1.2V, GND = 0V, SENSE = AVDD12, Single-channel mode, Differential Analog Input (AIN) = Sine wave with amplitude of -1 dBFS, fIN = 15 MHz, Clock Input = 80 MHz, fS = 80 Msps (ADC Core), PLL and decimation filters are disabled, Output load: CMOS data pin = 10 pF, LVDS = 100 termination, LVDS driver current setting = 3.5 mA, +25°C is applied for typical value. Parameters Sym. Min. Typ. Max. Units Conditions Power Supply Requirements Analog Supply Voltage AVDD18 1.71 1.8 1.89 V AVDD12 1.14 1.2 1.26 V Digital Supply Voltage DVDD18 1.71 1.8 1.89 V Note 1 DVDD12 1.14 1.2 1.26 V Analog Supply Current During Conversion at AVDD18 pin IDD_A18 —12.5 20 mA at AVDD12 pin IDD_A12 — — 132 132 170 173 mA TA = -40°C to +85°C TA = +85°C to +125°C Digital Supply Current Digital Supply Current During Conversion at DVDD12 Pin IDD_D12 — — 58 58 105 149 mA TA = -40°C to +85°C TA = -40°C to +125°C Digital I/O Current in CMOS Output Mode IDD_D18 — 8 14 mA at DVDD18 pin DCLK = 80 MHz Digital I/O Current in LVDS Mode IDD_D18 Measured at DVDD18 Pin —41 — mA LVDS_IMODE<2:0> = 3.5 mA — 29 — LVDS_IMODE<2:0> = 1.8 mA — 53 — LVDS_IMODE<2:0> = 5.4 mA Supply Current during Power-Saving Modes Standby Mode ISTANDBY_AN — 43 — mA Address 0x00<4:3> = 1,1(2) ISTANDBY_DIG —23 — Shutdown Mode IDD_SHDN — 23 — mA Address 0x00<7,0> = 1,1(3) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |