MCP37D31-80ESLASHTE datasheet(13/141 Pages) MICROCHIP

13 / 141 page

MCP37D31-80 AND MCP37D21-80

DS20006382A-page 13

 2020 Microchip Technology Inc.

2.0

ELECTRICAL SPECIFICATIONS

2.1

Absolute Maximum Ratings†

Analog and Digital Supply Voltage (AVDD12, DVDD12)......................................................................................................-0.3V to 1.32V

Analog and Digital Supply Voltage (AVDD18, DVDD18)......................................................................................................-0.3V to 1.98V

All Inputs and Outputs with respect to GND....................................................................................................... -0.3V to AVDD18 +0.3V

Differential Input Voltage ................................................................................................................................................|AVDD18 -GND|

Current at Input Pins .................................................................................................................................................................... ±2 mA

Current at Output and Supply Pins ......................................................................................................................................... ±250 mA

Storage Temperature ................................................................................................................................................... -65°C to +150°C

Ambient Temperature with Power Applied (TA)............................................................................................................ -55°C to +125°C

Maximum Junction Temperature (TJ) ..........................................................................................................................................+150°C

ESD Protection on all Pins ................................................................................................................................................... ≤2kVHBM

Solder Reflow Profile...............................................................................................See Microchip Application Note AN233 (DS00233)

2.2

Electrical Specifications

Notice†: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This is

a stress rating only and functional operation of the device at those or any other conditions above those indicated in

the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods

may affect device reliability.

TABLE 2-1:

ELECTRICAL CHARACTERISTICS

Electrical Specifications: Unless otherwise specified, all parameters apply for TA = -40°C to +125°C, AVDD18 =DVDD18 =1.8V,

AVDD12 =DVDD12 = 1.2V, GND = 0V, SENSE = AVDD12, Single-channel mode, Differential Analog Input (AIN) = Sine wave with

amplitude of -1 dBFS, fIN = 15 MHz, Clock Input = 80 MHz, fS = 80 Msps (ADC Core), Resolution = 16-bit, PLL and decimation

filters are disabled, Output load: CMOS data pin = 10 pF, LVDS = 100

termination, LVDS driver current setting = 3.5 mA, +25°C is

applied for typical value.

Parameters

Sym.

Min.

Typ.

Max.

Units

Conditions

Power Supply Requirements

Analog Supply Voltage

AVDD18

1.71

1.8

1.89

AVDD12

1.14

1.2

1.26

Digital Supply Voltage

DVDD18

1.71

1.8

1.89

Note 1

DVDD12

1.14

1.2

1.26

Analog Supply Current During Conversion

at AVDD18 pin

IDD_A18

—12.5

at AVDD12 pin

IDD_A12

—

132

170

173

TA = -40°C to +85°C

TA = +85°C to +125°C

Digital Supply Current

During Conversion

at DVDD12 pin

IDD_D12

—

105

149

TA = -40°C to +85°C

TA = +85°C to +125°C

Digital I/O Current in

CMOS Output Mode

IDD_D18

Measured at DVDD18 Pin, DCLK = 80 MHz, TA = -40°C to +125°C

—

MCP37D31-80

MCP37D21-80

Digital I/O Current in

LVDS Mode

IDD_D18

MCP37D31-80, Measured at DVDD18 Pin, TA = -40°C to +125°C

—

LVDS_IMODE<2:0> = 3.5 mA

—

LVDS_IMODE<2:0> = 1.8 mA

—

LVDS_IMODE<2:0> = 5.4 mA

MCP37D21-80, Measured at DVDD18 Pin, TA = -40°C to +125°C

—

LVDS_IMODE<2:0> = 3.5 mA

—

LVDS_IMODE<2:0> = 1.8 mA

—

LVDS_IMODE<2:0> = 5.4 mA

MCP37D31-80E/TE Datasheet(PDF) 13 Page - Microchip Technology

MCP37D31-80E/TE Datasheet(HTML) 13 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL