| Electronic Components Datasheet Search |
|
MFS2401AVBA0ES Datasheet(PDF) 32 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
MFS2401AVBA0ES Datasheet(HTML) 32 Page - NXP Semiconductors |
|
32 / 151 page ![]() NXP Semiconductors FS2400 Fail-safe system basis chip with SMPS and LDO, CAN FD transceiver Dynamic output voltage scaling The HVBUCK output voltage can be modified while running by using the dynamic voltage scaling (DVS) function to adapt to the supplied device needs. This is done by setting the bits of the M_REG2_CTRL SPI register. 14.1.2 HVBUCK clock management 14.1.2.1 Description The HVBUCK oscillator 20 MHz frequency can be modulated with a triangular or pseudo-random carrier frequency of 19 kHz, with a ±10 % deviation range around the oscillator frequency. The spread-spectrum feature can be selected by SPI. The MOD_EN bit enables the spread-spectrum feature and the MOD_CONF bit selects the triangular or pseudo-random modulation. These two bits are in the M_SYS_CFG SPI register. By default, the spread-spectrum feature is configured following the OTP configuration. The main purpose of the spread-spectrum feature is to improve EMC performance by spreading out the energy of the HVBUCK switching frequency. 14.1.2.2 Spread spectrum Triangular spread spectrum The triangular spread spectrum is activated in the M_SYS_CFG SPI register by setting the MOD_EN bit high and the MOD_CONF bit low. In this configuration, the internal oscillator is modulated with a triangular carrier frequency of 19 kHz with a ±10 % deviation range of the nominal oscillator frequency. aaa-051566 20 MHz + 10 % 20 MHz - 10 % No modulation (20 MHz) f t 52.6 µs (19 kHz) Figure 18. Triangular modulation Pseudo-random spread spectrum The pseudo-random triangular spread spectrum is activated in the M_SYS_CFG SPI register by setting the MOD_EN bit high and the MOD_CONF bit high. In this configuration, the internal oscillator is modulated with a triangular carrier frequency of 19 kHz with ±10 % deviation range of the nominal oscillator frequency, but two random commutations on the carrier slope are added in each half period to increase the spectrum content. aaa-051567 20 MHz + 10 % 20 MHz - 10 % No modulation (20 MHz) f t Same slope as triangular modulation Pseudo random commutation Figure 19. Pseudo-random modulation FS2400 All information provided in this document is subject to legal disclaimers. © 2024 NXP B.V. All rights reserved. Product data sheet Rev. 4 — 23 October 2024 Document feedback 32 / 151 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |